Allied Telesis AT-DMC100/ST-50 100Mbit/s 1310nm Multi-mode network media converter - Networking

DMC SeriesGigabit Desktop USB-Powered Media Converters The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today.Overview At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact—with a small carbon footprint—the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements. Fiber Connections The Allied Telesis range of Gigabit media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber.VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.Simple Instal

Networking
Packet forwarding rate (100 Mbps)	148800 pps
Packet forwarding rate (10 Mbps)	1488000 pps
Packet forwarding rate (1 Gbps)	14880 pps
Rate limiting	Yes
Cable types supported	Fiber
Converter input interface	100Base-TX
Fiber optic connector	ST
Ethernet LAN data rates	100 Mbit/s
Duplex system	Full, Half
Converter output interface	100Base-FX
Auto MDI/MDI-X	Yes
Data transfer rate (max)	100 Mbit/s
Technical details
Wavelength	1310 nm
Maximum transfer distance	2000 m
Fiber mode structure	Multi-mode
Internal	No
Ports & interfaces
Fiber optic connector	ST
DC-in jack	Yes
Performance
Wavelength	1310 nm
Maximum transfer distance	2000 m
Fiber mode structure	Multi-mode
Design
Internal	No
Packaging content
AC adapter included	Yes
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 65 °C
Operating relative humidity (H-H)	5 - 95%
Storage relative humidity (H-H)	5 - 95%
Operating altitude	0 - 3048 m
Weight & dimensions
Width	31.8 mm
Depth	91.4 mm
Weight	113.39 g
Height	21.6 mm

1. Non-Returnable Products: Once an order has been processed, items that are not classified as 3D memory products are non-returnable and cannot be cancelled.

2. Restocking Charges: A restocking fee of up to 25% may apply to eligible returns. The exact percentage depends on the product category.

3. Product Condition: All products are supplied in refurbished condition by default, unless explicitly stated as brand new retail stock prior to purchase.

4. Dispatch & Availability: Most orders are dispatched within 24 hours, subject to stock availability. For urgent or same-day dispatch requests, please contact our customer service team at (0)203-411-0694.

5. Manufacturer Part Numbers: Leading manufacturers such as Dell, HP, IBM, and Compaq may assign multiple identifiers to the same product, including Spare Part Numbers (Spare P/N#) or Field Replaceable Unit Numbers (FRU#). Items received may carry either designation and will be considered equivalent and fully compatible. For clarification, please contact our sales team.

6. Warranty Policy: All items are covered by a 30-day limited warranty, valid for replacement only in cases of DOA (Dead on Arrival), and must match the original part number. Certain storage devices may include an extended 90-day warranty—confirmation prior to purchase is recommended. Additional warranty options, including manufacturer or extended warranties, may be available upon request.

7. Drivers & Installation Media: Products are sold in bulk format and generally do not include installation media or drivers. If required, please confirm availability before placing your order.

8. Shipping Costs: Shipping charges are automatically calculated based on lighter items such as memory modules and hard drives (under 5 lbs). Heavier equipment, including servers, racks, or motherboards, may incur additional shipping costs. We recommend confirming shipping fees prior to order completion. In cases of discrepancies, our team will contact you to revise the charges accordingly.

9. Product Images: All product images are for illustrative purposes only. The actual item delivered may vary in appearance.

10. Packaging Disclaimer: Items may be shipped in bulk or non-retail packaging, particularly for large volume or consolidated orders.

11. End-of-Life (EOL) Products: Discontinued products may be substituted with equivalent parts that match the same FRU and functionality.

12. Refurbished Printers: Refurbished printers may not include toner cartridges, or may be supplied with partially used cartridges.

---

Need Assistance?

If you require further clarification or have any concerns, please contact us prior to placing your order:
📧 support@selectechnology.co.uk
📞 (0)203-511-0854

No reviews to show!