Netgear FS116PEU Fast Ethernet (10/100) Power over Ethernet (PoE) network switch

The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplinkâ„¢. The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	16
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
Copper ethernet cabling technology	100BASE-TX,10BASE-T
Networking
Networking standards	IEEE 802.3af,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x
10G support	No
Data transmission
MAC address table	1000 entries
Switching capacity	3.2 Gbit/s
Maximum data transfer rate	0.1 Gbit/s
Protocols
Data link protocols	Ethernet, Fast Ethernet
Design
Safety	CE; CE/LVD EN60950
Performance
Packet buffer memory	0.096 MB
Mean time between failures (MTBF)	116009 h
Power
Power consumption (typical)	80 W
Technical details
Mean time between failures (MTBF)	116009 h
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity	8
Power over Ethernet (PoE)	Yes
Certificates
Safety	CE; CE/LVD EN60950
Electromagnetic emissions	CE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22) Class A, C-Tick
Memory
Packet buffer memory	0.096 MB
Operational conditions
Storage temperature (T-T)	10 - 70 °C
Storage relative humidity (H-H)	95
Operating temperature (T-T)	0 - 40 °C
Weight & dimensions
Weight	840 g
Other features
Latency	20 µs for 64-byte frames
Data transfer rate	100 Mbit/s
Dimensions (WxDxH)	287 x 103 x 27 mm
Power requirements	48VDC, 4.5 power output
Electromagnetic emissions	CE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22) Class A, C-Tick

• No. of Ports: 16-Ports

1. Non-Returnable Products: Once an order has been processed, items that are not classified as 3D memory products are non-returnable and cannot be cancelled.

2. Restocking Charges: A restocking fee of up to 25% may apply to eligible returns. The exact percentage depends on the product category.

3. Product Condition: All products are supplied in refurbished condition by default, unless explicitly stated as brand new retail stock prior to purchase.

4. Dispatch & Availability: Most orders are dispatched within 24 hours, subject to stock availability. For urgent or same-day dispatch requests, please contact our customer service team at (0)203-411-0694.

5. Manufacturer Part Numbers: Leading manufacturers such as Dell, HP, IBM, and Compaq may assign multiple identifiers to the same product, including Spare Part Numbers (Spare P/N#) or Field Replaceable Unit Numbers (FRU#). Items received may carry either designation and will be considered equivalent and fully compatible. For clarification, please contact our sales team.

6. Warranty Policy: All items are covered by a 30-day limited warranty, valid for replacement only in cases of DOA (Dead on Arrival), and must match the original part number. Certain storage devices may include an extended 90-day warranty—confirmation prior to purchase is recommended. Additional warranty options, including manufacturer or extended warranties, may be available upon request.

7. Drivers & Installation Media: Products are sold in bulk format and generally do not include installation media or drivers. If required, please confirm availability before placing your order.

8. Shipping Costs: Shipping charges are automatically calculated based on lighter items such as memory modules and hard drives (under 5 lbs). Heavier equipment, including servers, racks, or motherboards, may incur additional shipping costs. We recommend confirming shipping fees prior to order completion. In cases of discrepancies, our team will contact you to revise the charges accordingly.

9. Product Images: All product images are for illustrative purposes only. The actual item delivered may vary in appearance.

10. Packaging Disclaimer: Items may be shipped in bulk or non-retail packaging, particularly for large volume or consolidated orders.

11. End-of-Life (EOL) Products: Discontinued products may be substituted with equivalent parts that match the same FRU and functionality.

12. Refurbished Printers: Refurbished printers may not include toner cartridges, or may be supplied with partially used cartridges.

---

Need Assistance?

If you require further clarification or have any concerns, please contact us prior to placing your order:
📧 support@selectechnology.co.uk
📞 (0)203-511-0854

No reviews to show!